Content | Date | Cost | Contractor Rank | Address | Contractor |
---|---|---|---|---|---|
SCORE 55 Contractor: Kulraj Multani Permit status: Rejected | Expiration date: January 6, 2013 | Permit id: 0 | |||||
SCORE 55 1904 14th Street Nw Washington Dc We are moving the east side fence to the west side because it is open. The east side has been doubled up by our neighbor business. 36 high, pics included in in permit. Materials to be as follows: all ornamental iron fence panels are custom built to grade and slope as feasible and allow for a 2 to 4 sweep line. All pickets shall be 1 2" round solid steel spaced uniformly not to exceed 5 and welded to two (2) 1 x 1 2" x 1 8 steel channels. All pickets shall be welded to two sides at each channel connection. All welds shall be from the non exposed underside of the machine punched channels. Decorative spears shall be welded to the top of each picket with nickel rods as per manufacturers recommendation. Straight pickets shall have decorative center collars. All posts shall be 1 square solid steel, post spacing not to exceed 66. All posts shall be core drilled and set using non-shrink epoxy cement. All posts shall have welded decorative post caps. Total fabrication and installation to be of Contractor: Kulraj Multani Permit status: Cancel/withdrawn | Expiration date: August 22, 2014 | Permit id: 0 | |||||
SCORE 55 Contractor: Kulraj Multani Permit status: Rejected | Expiration date: January 6, 2013 | Permit id: 0 | |||||
SCORE 55 1904 14th Street Nw Washington Dc We are moving the east side fence to the west side because it is open. The east side has been doubled up by our neighbor business. 36 high, pics included in in permit. Materials to be as follows: all ornamental iron fence panels are custom built to grade and slope as feasible and allow for a 2 to 4 sweep line. All pickets shall be 1 2" round solid steel spaced uniformly not to exceed 5 and welded to two (2) 1 x 1 2" x 1 8 steel channels. All pickets shall be welded to two sides at each channel connection. All welds shall be from the non exposed underside of the machine punched channels. Decorative spears shall be welded to the top of each picket with nickel rods as per manufacturers recommendation. Straight pickets shall have decorative center collars. All posts shall be 1 square solid steel, post spacing not to exceed 66. All posts shall be core drilled and set using non-shrink epoxy cement. All posts shall have welded decorative post caps. Total fabrication and installation to be of Contractor: Kulraj Multani Permit status: Cancel/withdrawn | Expiration date: August 22, 2014 | Permit id: 0 |