Install 4 inch brick veneer on new concrete footing in front of existing masonry wall as per 2009 irc 703. 7. Maximum height: feet above foundation. Maximum thickness 5 inches. Window and door openings same size location. New concrete footing to be below frost line, ( inches). New wall shall be anchored to supporting wall with corrosion-resistant metal ties 24 inches on center horizontally and vertically. Provide 1 inch air space between walls. Provide weep holes and flashing above window and door openings. Provide capping, flashing and caulking at termination of wall to prevent water infiltration. An inspection of existing wall to be scheduled with inspector before work starts.

Remove non bearing partition, install new gypsum board. Install new flooring and replace exterior doors. Re-do stucco. Interior alterations - single family dwelling - applicant agrees to limit the construction to comply with ez permit standard for interior alterations, dated feb. 2007. Deviations from this standard will result in the revocation of this permit and imposition of further penalties. Licensed contractor to be listed on permit separate permits required for plumbing, electric and hvac. Call inspector at district office at least 24 hours prior to starting work.

Interior demolition of non load bearing walls and ceilings only. Removal of exterior siding. No other work allowed under this permit. Contact streets department for dumpster permit and footway closure.

Installation of hot air gas all duckwork

Rewire for lighting and recepts as per 2008 nec(sfd)(cc dist)

Sfd-install drain & water lines to accomodate: 1wc,1lav,1sh,1ks

Stucco south wall