Upgrading the service from 4 amps to 6 amps,change the service cables from amps to 1 amps in each apartment,install baseboard heaters,each unit as per 2008 nec (east dist)

36 outlets 2 volts single phase 20amp (3 in each apt)per 2008 nec (multi family)east district

For a certificate of occupancy of a previously approved twelve family dwelling, minor alterations to include the replacement fire rated doors throughout. Review completed under code bulletin a-1301. No other work permitted. Compliance with philadelphia property maintenance and fire code prior to occupancy.

For the amendment of previously approved permit #765009 to document existing accessory office within residential unit on the first floor of an existing structure. Please refer to ap#700339 for accessible ramp to existing business occupancy within residential unit. Original application approved for a certificate of occupancy of a previously approved twelve family dwelling, minor alterations to include the replacement fire rated doors throughout. Review completed under code bulletin a-1301. No other work permitted. Compliance with philadelphia property maintenance and fire code prior to occupancy.

For the amendment of previously approved permit #801412 to document existing accessory office within residential unit on the first floor of an existing structure. Please refer to ap#700339 for accessible ramp to existing business occupancy within residential unit. Original application approved for a certificate of occupancy of a previously approved twelve family dwelling, minor alterations to include the replacement fire rated doors throughout. Review completed under code bulletin a-1301. No other work permitted. Compliance with philadelphia property maintenance and fire code prior to occupancy.

For the extension of an existing stair lift attached to an existing wall in the secondary stairwell, previously approved on permit ap# 742181 to the 2nd floor level, in an existing multi-family structure, as per plans; lift is battery-operated as per manufacturers specifications and will require no electrical work; seat must automatically return to bottom of rail when not in use; no other work on this permit.